
Tel. 877-488-8866
Stainless Steel Sliding Door with clear glass and stainless framing by Modernus.
The Steel Line features a low profile stainless steel frame in a variety of finishes with an acid etched or laminated glass panel in a variety of finishes. The Steel Line uses only the highest end, food grade, stainless steel and has the ability to support large panels with very low profile frames. Sliding doors are available with ceiling hung, wall valenced or recessed sliding tracks. Hinged doors feature 180 degree concealed hinges. Available in completely custom sizes and finishes.
Designer:
BraytonHughes Design Studios with Sherry Williamson
Lamping:
LED
Nine, 2.64w each (23.76w total)
(lamps provided with fixture)
LED (downlight)
Three. 2.64w each (7.92w total)
(lamps provided with fixture)
The Phantom can be dimmed, and the dimming electronics is integral to the fixture.
Upcharges will apply for LED dimming. Please contact your local Boyd rep with the specification of the dimming control system being used.
Dimensions:
Height: 15 1/4"; 387 mm
Width: 7 1/2"; 191 mm
Projection: 6 1/4"; 159 mm
Net wt.: 15 lbs; 6.8 kg
Center of outlet box to top of fixture: 4"; 102 mm
For ADA compliance, height of center of outlet box above finished floor: 91 1/4"; 2318 mm
Finish:
Shown: Satin Nickel
Available in: Antiqued Boyd Brass, Blackened Brass, Satin Brass, Satin Nickel
Additional:
UL listed (or equivalent) for wet locations
Front/side diffusers: water white glass
Mirrored inside back panel
info@jGoodDesign.com 212.475.0479 x2 Our New York City studios are located in downtown Brooklyn and Long Island City, Queens. Our mailing address is 24 Fifth Avenue, Ste 709, New York, NY 10011. On-site meetings are available at our Long Island City location, by appointment
ey Selection Attributes
The Tile Shop Attn: Customer Care 14000 Carlson Parkway Plymouth, MN 55441
is available in slabs, measuring 306x140cm, with thickness ranging from 1.3cm, 2cm and 3cm used for horizontal and vertical applications. It can also be customized to fit any project.
has a absorption rate of 0.022 percent whilst granite is the next closest at 0.2-1.0 percent.
OKITE's strength and durability are unparalleled as proven by outside independent sources that conducted tests on its physical, mechanical and environmental properties. Consequently does not require sealing or polishing.
The results of these tests confirm that against marble and granite, is the strongest of the three and is much more resistant to cracking, staining or breaking than any other quarried stones.
In fact only three minerals : diamond, sapphire and topaz - are stronger than okite.
Additionally, withstands limited exposure to normal cooking temperatures.
Unlike marble or granite, does not require any special care or maintenance. It is resistant to staining, scratching and heat and features higher flexibility and strength as compared to other quarried stone, as well as its ability of not absorbing liquids.
With routine care, the remarkably low-maintenance will preserve its look and beauty for years to come. In addition to the product's proven performance qualities, fulfils both decorative and specific design needs for commercial, institutional and residential applications.
is ideal for kitchen counter tops, bath vanity tops, hotel reception areas, as well for treads and risers, floor tiles, cladding and partition walls.
OKITE's versatility, beauty and outstanding performance qualities make it an extremely desirable and sought after surfacing material for all spectrums of the design industry.